15 Reasons Why You Shouldn't Ignore Aircon Installation
If you're looking to replace your older air conditioner or putting in a brand new one There are a few important things to consider before beginning.
Installing your air conditioner properly assures security and reliability. The frame or window on which the air conditioner is mounted should be secure and in good working order.
Switch off the electrical
If you're planning to set up your air conditioning system for winter or installing a new model, it's vital to cut off energy source. Your family will be safe from electric shocks and your equipment from surges of electricity.
The outside power circuit of the AC unit is located at the back of your home, near the condenser. The cover is lifted then flip the switch to the "off" location. Cover the lid and let it sit for at least 30 minutes in a seated position to allow the circuit breakers reset.
It could take time to get the AC to start working properly. Take your time.
In addition, if you are removing an older AC unit from your house switch off power to it prior to removing the appliance. The unit left connected to the electricity could lead to it being overheated or freeze, which could cause damage to it.
Another reason to shut off electrical power is when there's power outages at the home. This will reduce the demand of the electrical system that can speed up the restoration process in the event that electricity comes to a halt.
It is also possible to think about installing a surge protector to protect your equipment from the damaging effects of power fluctuations. A surge protector can be expensive but could be worth the cost to protect your equipment from damaging damages in the event of an interruption at your house.
It's smart switch off power to your system when you use a thermostat for controlling the heating or cooling. It will stop your thermostat to turn the air conditioner on while it is resetting its circuit breaker within it, that will allow the system to get back to running more efficiently.
Call an HVAC technician if unable to reset the breakers on your own. They'll also check your system for any malfunctions that could be the reason for the breaker to go off initially.
Prepare the Window
In the course of installing air conditioners is crucial to clean the window, and ensure that the window is ready to be able to support the unit. You will be safer and installation can be completed smoothly.
To prep the window, start by making sure that there aren't any decay or cracks inside the sill or frame. It reduces the possibility of your air conditioner being damaged or not being able to be installed.
If there's any obstructions, such as screens or storm windows, remove them to make certain that there is enough space to open the window opening. Additionally, it is recommended that you strengthen the window's frame in order to allow it to support any AC load.
Draw the horizontal center of the window by using pencil. This will allow you to place it in the right position. It will spread its weight over the strongest regions of the window frame. This will also help in creating an ideal seal.
After locating the proper place, lift the window unit with an assistant's help then place it onto the windowsill. Some window units come with sides and bottom rails in order to assist in fixing the air conditioner to the window. Certain manufacturers include accordion-style panels on the sides to fill the gap between the air conditioner's frame and window frame.
Once your air conditioner is placed in the correct position, employ a power screwdriver, or drill to secure the mounting rails as well as side panels per your manufacturer's instructions. These components will hold the air conditioner's window in the correct position, as well as help to keep it in position during the entire installation.
Install the AC after the rails for mounting or side panels, as well as the other components are installed. The weather strip that is included on certain air conditioners prevents the incoming cold air from reaching your window making it damaged.
Some models will also include L-brackets that help anchor the window air conditioner in the lower edge of the sash of windows. These pieces are a safety precaution to stop the unit from falling out.
Shut the window when you have the unit in position. The final thing to do prior to utilizing your AC is to close the window.
Installation of the indoor unit
When installing an air conditioner unit, it is important to follow the directions of the manufacturer and ensure the indoor system is properly mounted. This will help ensure that it's working properly and won't fall or fail in the future.
The engineer will create the hole for the wire and pipe that is connected to an indoor device. They will then connect the piping with outside unit in accordance with the directions of the manufacturer.
The next step is to connect a low voltage control wire to your indoor unit in order to switch it off and on. This will also allow you to control the temperature of your space by using your remote.
The technician also has to connect the refrigerant lines and the outside unit. The lines will connect from the indoor evaporator coil to the condenser outside, which is crucial to connect them correctly in order that the unit doesn't leak or be destroyed.
When the line is hooked up, the technician will establish a suction line that extends from your outdoor air conditioner and the air duct system in the home. The set of lines is attached to the appropriate valve for service on the air conditioner. This valve functions as a connection to the line set and it also isolates the refrigerant from the air conditioner, so you don't have to change it in the event there is a problem at some point in the future.
Your technician will install an air valve in your home if it does not have one. It will be easier for them to fix your new air conditioner to come back.
After installing your air conditioner start it up to check that it's functioning correctly. You should feel cooler and more relaxed as soon as the unit is turned on.
It is also important to ensure that your thermostat is functioning as you expect it to. The thermostat might not be operating properly and this could cause your air conditioner to be operating more frequently than it needs to.
It's also a good idea that your contractor walks you through how it works as well as how you can operate it. You'll feel more secure of the job and installation business. You will have the opportunity to ask questions about any problems that might have arisen throughout the process of installing.
Installing the Outdoor Unit
This is the outdoor unit that houses your compressor and condenser. In addition, it houses the refrigerant. It serves to draw water and heat out of your house's air. It can be mounted on your roof, or installed beneath the floor using specialized equipment.
The location of the outdoor unit is crucial for efficient operation and a longer lifespan. A HVAC technician will assist you to choose the most suitable location for your HVAC unit.
A well-placed outdoor unit helps your AC unit to operate install air conditioning more effectively and save you money on the cost of energy. It is recommended to have the outdoor unit located against a wall with a view of either direction to get optimal cooling. The best option is to stay clear of east and west facing walls since these are more exposed to sun in the summer months, which makes the AC work harder. It can also raise costs for energy.
Place the unit outside at a location that is unobstructed by trees or objects. Make sure it is not in areas with dust or heat due to the fact that these factors could affect the efficiency.
After the outdoor unit is mounted, you should connect the piping and cable that connects the indoor unit to. This isn't an easy task, so we recommend using a professional for it for you.
Your local Daikin specialist can assist in determining the best location for your outdoor unit and give you instructions on how to connect the piping. It may be necessary in order to link the service valve as well as line set.
The cables and the piping must be connected securely as suggested by the manual for product manufacture. It's also beneficial to use covers as the lines are exposed to the elements.
A composite mat installed instead of concrete pads will lessen the noise and vibration. The mat will last longer than your outdoor unit, saving you money on repairs.
You may also want to consider securing the outdoor device to an existing structure such as deck or patio. It will prevent the unit from moving around during hot summer days, and also won't damage your property.